However, these drivers might not be enough if you are looking to carry out advanced functionalities. For tech enthusiasts, Fastboot is usually their go-to mode. Right from unlocking the bootloader, to flashing a custom recovery or even rooting their device via the Magisk patched boot.img, there’s a lot to try out. However, there have been a few instances when the PC isn’t able to identify the connected device, even if the USB Drivers are installed. This happens when the appropriate Bootloader drivers aren’t installed. As a result, you wouldn’t be able to execute any Fastboot Command. Well, if you are currently going through this issue, then this guide shall help you to download and install the MediaTek Fastboot Drivers for the Fastboot connection. Follow along.
How to Install TWRP on MediaTek using SP Flash ToolBypass MediaTek SP Flash Tool SLA DAA AuthenticationHow to Root any MediaTek Device Using SP Flash ToolHow to Unbrick any MediaTek Phone using SP Flash Tool
Download MediaTek Fastboot (Bootloader) Drivers
Before moving ahead with the instructions, make sure to grab the driver file from the below link:
Download: MediaTek Bootloader Interface Drivers
How to Install MediaTek Fastboot Drivers
So with this, you have successfully installed the MediaTek Fastboot Drivers. You may now check the Fastboot Connection by referring to our guide on How to Boot any Android Device to Fastboot Mode. You may also refer to the below shorter instructions:
How to Boot MediaTek Device to Fastboot Mode
So with this, we round off this tutorial on how to download and install the MediaTek Fastboot Drivers. If you have any queries, do let us know in the comments section. We will get back to you with a solution at the earliest.
About Chief Editor
